VoghjUIN!
Husov em kgtnvi mard, ov setup-a arel remote access server under linux, u kogni indz
Install em anum mgetty, yev mgetty+sendfax paketnery.
Arden mgetty pakety steghtzuma /etc/mgetty+sendfax foldery, vortegh kan
dialin.config
login.config
mgetty.config
sendfax.config filery, u eli mi erku ankap ban
dialin.config file-y defaultova:
# dialin.config (CNDFILE in policy.h)
#
# cndfile contains a series of tokens separated by newlines, commas, tabs
# and spaces. The callerid number is compared with each token in turn,
# until a match occurs. A match occurs when the token compares equally to
# the callerid information up to the length of the token. If the token is
# prefixed with a "!", a match means "do not answer the phone". The token
# "all" matches any telephone number, and will terminate scanning of the
# cndfile. If no callerid number is present, it is assumed to have the
# value "none". A line starting with "#" is a comment. There is an
# implicit "all" at the end of the file.
#
# For example:
# list of my friends' data lines
#3433535, 7445343, 5551212
#
# dad's fax
#4164646777
#
# disallow [other] calls from numbers matching the following prefix:
#!416
#
# disallow that speed dialer that keeps hitting my machine
#!3444444
#
# allow all calls with the following prefixes
#832, 555
#
# don't allow calls when there's no callerid:
#!none
#
# It's okay to accept calls from out of area
# ("OUT_OF_AREA" token seems ZyXEL specific)
#OUT_OF_AREA
#
# disallow all other calls
#!all
# disallow all other calls
#!all $
login.config file-y:
#/AutoPPP/ - a_ppp /usr/sbin/pppd auth -chap +pap login debug
/AutoPPP/ - /etc/ppp/ppplogin
#* - - /bin/login @
mgetty.config file-y:
# For USRobotics V.Everything
port ttyS0
speed 33600
data-only y
debug 3
init-chat "" AT OK ATS7=50S0=1+S62=3+S64=2S39=10 OK
(modemy us robotics-a)
de sendfax.config-y kap chuni...
/etc/ppp folder-um options file-y edit aneluc heto hetevyal tesq unecav
lock
login
auth
netmask 255.255.255.248
modem
crtscts
-chap
+pap
mtu 576
mru 576
proxyarp
#serveri ip : diap-up userin nshanakvogh ip
62.84.105.51:62.84.105.52
#nshanakvogh dns windows kliwntneri hamar
ms-dns 62.84.100.7
Steghtzel em naev options.ttyS0 file, vori mej nuynnem grel
/etc/inittab-um avelacrel em hetevyal hatvatzi verjin toghy:
#Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
S0:2345:respawn:/sbin/mgetty /dev/ttyS0
dial-up lineluc modemy nuynisk trubkan cher vercnum...
Ayd depqum hetevyal hodvatzin hamadzayn varveci yev link steghtzeci:
Next to enable any user to read from and write to the serial port where
the modem is connected. For example if the modem is connected to COM1
(/dev/ttyS0), type chmod o+w /dev/ttyS0 to give everyone write permission
for that device.
Now you will need to establish a link between the /dev/modem and the
serial port devoce where the modem is connected. If the modem is on
/dev/ttyS0 you should type the following command:
ln -s /dev/ttyS0 /dev/modem
ln -s /dev/ttyS0 /dev/modem
U inittab-ub arden greci linki tchanaparhy: $
S0:2345:respawn:/sbin/mgetty /dev/modem
Ays popokhutyunic heto modemy zangin sxsec pataskhanel, trubken vercrec u
akanjin hatcheli dzener sxec hanel
))
Connect iharke cheghav
Inchem skhal arel?
Kam karogha ashkhatogh conf filer meknumeky unena?
Sistemas redhat 7.3-a
))
Shnorhakalutyun